Philips AVCHD HDC-TM20 - Manual (Page 62)

62
VQT2B30
Function Effect/Setting method
Wind noise reduction This is for reducing the wind noise coming into the built-in
microphones depending on the wind strength.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. ( l 40)
Select the menu. (l 27)
[RECORD SETUP] # [WIND CUT] # [ON]
Microphone setup
[SURROUND]:
Sound is recorded with
5.1 ch surround microphone.
[ZOOM MIC]:
Directivity of the microphone
is interlocked with the zoom
operation. Sounds near the
front of the unit are recorded
more clearly if you zoom in
(close-up) and surrounding
sounds are recorded more
realistically if you zoom out
(wide angle).
Directivity (sound sensitivity direction) of the built-in
microphones can be adjusted.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. ( l 40)
Select the menu. (l 27)
[RECORD SETUP] # [MIC SETUP] # desired setting
≥ This function’s default setting is [SURROUND].