Philips AVCHD HDC-TM20 - Manual (Page 94)

94
VQT2B30
∫ To watch images on a regular TV
(4:3) or when both sides of the
images do not appear on the
screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
Select the menu. (l 27)
Example of images with a 16:9 aspect ratio on
a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
∫ To display the on-screen
information on the TV
When the EXT DISPLAY button on the remote
control is pressed, the information displayed on
the screen (operation icon and time code etc.)
can be displayed/not displayed on the TV.
≥ It will not display when the power is turned off.
≥ When connecting with a HDMI mini cable, be
sure to connect to a HDMI input terminal. Do
not connect to a HDMI output terminal on other
products.
≥ If the HDMI mini cable, component cable and
AV cable are connected at the same time,
output will be prioritized in order of the HDMI
mini cable, component cable and AV cable.
[SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
SEARCH
STILL ADV STILL ADV
SEARCH
/VOL
DATE/TIME
STOP
EXT DISPLAY
PLAY
STOP SKIP SKIP
PAUSE
Refer to the following support site for information about the Panasonic TVs that you can
directly insert an SD card into the SD card slot on the TV and then play it back.
http://panasonic.net/
≥ For details on how to play back, please read the operating instructions for the TV.