Philips AVCHD HDC-TM20 - Manual (Page 34)

34
VQT2B30
It is possible to display and record the time at the travel destination by selecting your home region and
the travel destination.
1
Select the menu. (l 27)
≥ If the clock is not set, adjust the clock to the
current time. (l 32)
≥ When the [HOME] (your home region) is not
set, the message appears. Touch [ENTER] and
proceed to Step 3.
2
(Only when setting your home region)
Touch [HOME].
≥ Touch [ENTER].
3
(Only when setting your home region)
Touch / to select your home
region and touch [ENTER].
≥ Touch [SUMMER TIME SET] to set daylight
saving time. appears and the
summer time setting is turned on; the clock
is set forward by one hour. Touch
[SUMMER TIME SET] again to return to the
normal time setting.
≥ The current time appears on the left top of the
screen. The time difference from GMT
(Greenwich Mean Time) appears on the left
bottom of the screen.
4
(Only when setting the region of your travel
destination)
Touch [DESTINATION].
≥ Touch [ENTER].
≥ When the home region is set for the first time,
the screen for selecting home/travel
destination appears after setting the home
region successively. If the home region has
already been set once, execute the menu
operation for Step 1.
5
(Only when setting the region of your travel
destination)
Touch / to select your travel
destination and touch [ENTER].
≥ Touch [SUMMER TIME SET] to set daylight
saving time. appears and the
summer time setting is turned on; the clock
is set forward by one hour. Touch
[SUMMER TIME SET] again to return to the
normal time setting.
≥ The local time at the selected travel destination
appears on the right top of the screen. The
time difference between the travel destination
and the home region appears on the left
bottom of the screen.
≥ Close the setting by pressing the MENU
button. appears and the time of the
travel destination is indicated.
To return the display to the home setting
Set the home region using Step 1 to 3, and close
the setting by touching [EXIT] or pressing the
MENU button.
≥ If you cannot find your travel destination in the
area shown on the screen, set it by using the
time difference from your home region.
World time setting (Displaying the time of the travel
destination)
[SETUP] # [SET WORLD TIME] # [YES]