Panasonic DMC-LC5PP - Manual (Page 46)

46
Adjusting the Flash Output
It is possible to adjust the flash output.
[Preparation]
• Set the operational mode dial and REC
mode dial. (P25)
1
Press the [ ] button to
select [ FLASH].
2
Press 2/1 to set the flash output.
• You can adjust the range from -2EV
to +2EV with 0.25 EV steps.
3
Press the [REVIEW/SET] button.
4
Take a picture.
• The recording method is the same as
in “Taking Pictures (AUTO Mode)”.
(P28)
• In AUTO [ ] or motion image [ ] mode, it is not possible to adjust the
flash output.
EXIT:
FLASH