Panasonic DMC-LC5PP - Manual (Page 93)

93
Troubleshooting
1: The power does not turn on.
1-1: Are the battery and the AC
adaptor correctly connected?
Check the connection.
1-2: Is the battery sufficiently
charged? Use a battery that has
been sufficiently charged.
2: As the power is turned on, it
turns off immediately.
2-1: Is the battery charge insufficient
to operate the camera? Charge
the battery or replace it with
charged one.
2-2: Has condensation occurred?
Carrying the digital camera from
a cold place to a warm place
could cause condensation form
inside the camera. Wait until
condensation disappears.
3: The image cannot be
recorded.
3-1: Is the memory card inside?
3-2: The operational mode dial is not
set to REC mode.
3-3: There is no memory capacity left
on the card. Before recording,
delete some images.
4: The image is not displayed on
the LCD monitor.
4: Is the LCD monitor set to off?
5: The LCD monitor is too bright
or dark.
5: Adjust the brightness of the LCD
monitor.
6: The display or images on the
LCD monitor are not focused.
6: Set the focus mode correctly.
7: The flash does not fire.
7: The flash mode is set to forced
OFF. Change the flash mode.
8: The image cannot playback.
8-1: Is the memory card inside?
8-2: There is no image in the memory
card.
8-3: The operational mode dial is not
set to playback [ ].
9: The image is not displayed on
the television.
9-1: Is the camera correctly
connected with the TV? Check it.
9-2: Set the TV to video input mode.
10: When connecting to PC,
images cannot be transferred.
10: Is the camera correctly
connected with PC? Check it.