Panasonic DMC-LC5PP - Manual (Page 52)

52
Setting ISO Sensitivity
ISO sensitivity is a value that corresponds
to the sensitivity to light. The higher it is,
the better the camera performances are in
dark places.
[Preparation]
• Set the operational mode dial and REC
mode dial. (P25)
1
Press the [MENU] button.
2
Press 3/4 to select
[SENSITIVITY].
3
Press 2/1 to select the sensitivity.
• AUTO: If “AUTO” is selected and
Flash mode is “Forced OFF”, if
available light needs shutter speed
slower than 1/30, the ISO sensitivity
is automatically adjusted up to ISO
200 and shutter speed stays 1/30,
to reduce the affect of a camera
jiggle. In case if your picture is still
too dark, please use the flashlight.
•
•
•
4
Press the [MENU] button.
• The menu will disappear.
5
Take a picture.
• The recording method is the same as
in “Taking Pictures (AUTO Mode)”.
(P28)
• In aperture-priority AE [ ], shutter-priority AE [ ] or manual exposure
[ ] mode, it is not possible to set to [AUTO] ISO sensitivity.
• In AUTO[ ] or motion image [ ] mode, it is set to [AUTO].
REC SETUP
W.BALANCE
SENSITIVITY
SPOT AF
AUDIO REC.
PICT.SIZE
QUALITY
SELECT: SET EXIT