Panasonic DMC-LC5PP - Manual (Page 56)

56
Taking Pictures with Burst Mode
By continuously pressing the shutter
button, it is possible to record in burst
mode. (4 frames/second maximum of 8
frames)
[Preparation]
• Set the operational mode dial and REC
mode dial. (P25)
1
Set the operational mode dial to burst
mode [ ].
2
Press the shutter button halfway to
lock the focus, then press it fully to
take pictures in sequence.
• It is possible to record in burst mode 4
frames in 1 second, at a shutter speed
higher than 1/25, but the flash does not
fire simultaneously.
• If the flash fires, it is possible to record
only 1 frame.
• When quality is set to TIFF [ ], it is not
possible to use the burst mode.
• When quality is set to fine [ ], it is
possible to record in burst mode a
maximum of 4 frames.
• In motion image mode [ ], the burst
mode cannot be used.
• Only the first picture recorded is
displayed on the LCD monitor.
M S
A
P