Connecting to pc – Panasonic DMC-LC5PP User Manual
Page 85
85
Connecting to PC
[Preparation]
Only if using Windows
®
98 or Windows
®
98 Second Edition, start the supplied CD
from PC and install the USB driver.
1
Connect the camera to PC via the
supplied USB cable.
2
After inserting the memory card into
the camera, set the operational
mode dial to playback [
] and
turn the power switch to [ON].
[Windows]
The drive is shown on the [My
computer] folder.
• If it is the first time you are connecting
the camera to PC, the required driver
is installed automatically in order to
let the camera be recognized by the
Windows plug and play, then it is
shown on the [My computer] folder.
[Macintosh]
The drive is shown on the screen.
• When connecting to PC it is
recommended to use the AC adaptor for
the power source.
• For further information, read the supplied
operating instructions for USB
connection kit.