Panamax BANKS WIRING MB1000 - Manual (Page 3)

This manual contains important instructions that should be
followed during installation and maintenance of the UPS
and batteries.
Please read and follow all instructions carefully during
installation and operation of the unit. Read this manual
thoroughly before attempting to unpack, install, or operate.
CAUTION! The UPS must be connected to an AC power
outlet with fuse or circuit breaker protection.
DO NOT plug the machine into an outlet that is not
grounded. If you need to de-energize this equipment, turn
off and unplug the UPS.
CAUTION! DO NOT USE FOR MEDICAL OR LIFE
SUPPORT EQUIPMENT!
Panamax does not sell products for life support or medical
applications. DO NOT use in any circumstance that would
affect operation or safety of any life support equipment,
with any medical applications, or patient care.
CAUTION! The battery can energize hazardous live parts
inside even when the AC input power is disconnected.
1
Important Safety Instructions
CAUTION! To prevent the risk of fire or electric shock
install in a temperature and humidity controlled indoor area,
free of conductive contaminants. (Please see specifications
for acceptable temperature and humidity range).
CAUTION! To reduce the risk of electric shock, do not
remove the cover. No user serviceable parts inside.
CAUTION! To avoid electrical shock, turn off the unit and
unplug it from the AC power source before installing a
component.
CAUTION! DO NOT USE WITH OR NEAR AQUARI-
UMS! To reduce the risk of fire, do not use with or near
aquariums. Condensation from the aquarium can come in
contact with metal current contacts and cause the machine
to short out.
Note: AC Power management devices, such as a UPS, have
certain limitations with regard to reactive loads and wattage.
The MB1000 has a handling capacity of 1000VA or approxi-
mately 600 watts. Excessive power consumption beyond
these specifications can affect battery life and performance.
IMPORTANT!
For proper operation, the batteries in this UPS
need to be fully charged prior to installation.
To Charge Batteries: Plug this UPS into an AC
receptacle and allow the batteries to charge
completely (6-8 hours) before connecting
other equipment to it.
Battery replacement recommended every two years.
DO NOT ATTEMPT BATTERY REPLACEMENT!
Must be serviced only by a qualified service
technician. Contact Customer Service for
information at 800-472-5555 .