Paxar Monarch TC6039SA - Manual (Page 20)

3-6 System Administrator’s Guide
Finding a Network
The printer searches for available networks and lists the SSIDs, signal
strength, and encryption. You can connect to an existing network profile if
you have the required network security information.
1. Tap , Find WLANs.
The printer searches for all networks in range and lists them
alphabetically by SSID. This may take a few minutes.
Note: A key indicates that encryption is enabled on the access point. You
must have the network encryption settings to connect to a protected
access point.
2. Double-tap the network you need, then tap Connect in the pop-up menu.
The Profile Entry screen appears.
3. Tap Next to verify the mode, authentication, encryption, and IP
configuration settings.