Paxar Monarch TC6039SA - Manual (Page 51)

Configuring the Scanner 5-13
Configuring MSI Bar Codes
1. To configure MSI settings, tap MSI from the
Scanner Configuration screen.
2. Enable each bar code you need to scan.
MSI Allows the scanner to scan MSI bar
codes.
Transmit
CD Tells the scanner to return the
check digit with the data when an
MSI bar code is scanned.
Mod
10/11 CD
Scheme Tells which algorithm to use to
ensure the integrity of a two-check
digit MSI bar code.
Use 2
CDs Tells the number of check digits that MSI bar codes should
have.
Note: Check digits are not always returned with the data. If
you choose two check digits, you must choose a check
digit algorithm.
Lengths
Sets the
length(s)
for MSI
bar
codes. Variable, specifies that MSI bar codes can be any length.
Note: Specifying a range of lengths increases the likelihood
of unsuccessful scans.
1 Fixed, secifies a single length for valid MSI bar codes. The
range for Length 1 is 1 – 99. The default is 6.
2 Fixed, secifies two lengths for valid MSI bar codes. The
range for Length 2 is 1 – 99. The default is 55.
3. Tap OK to save all the settings and return to the Scanner
Configuration screen.