Paxar Monarch TC6039SA - Manual (Page 45)

Configuring the Scanner 5-7
5. Tap the Page 2 tap at the top of the screen to
continue.
6. Enable each bar code you need to scan.
Coupon
Code Allows the scanner to scan UPCA,
UPCA+2, UPCA+5, and UPCA/EAN-
128 bar codes.
Note: Set Supplemental to Auto to
use this option.
UPCE to
UPCA Tells the scanner to convert UPCE
bar codes to a UPCA format before
returning the data.
Note: After the conversion, your
UPCA selections affect the
data.
EAN Zero
Extend Tells the scanner to add 5 leading zeros to EAN8 bar codes
to convert them into EAN13 bar codes.
Bookland Allows the scanner to scan Bookland EAN bar codes.
EAN8 to
EAN13 Tells the scanner to label the bar code as EAN8 or EAN13
when EAN Zero Extend is enabled.
UPCE1 to
UPCA Tells the scanner to convert UPCE1 bar codes to a UPCA
format before returning the data.
Note: After the conversion, your UPCA selections affect the
data.
7. Set the Supplemental Mode for UPC/EAN bar codes, which specifies
how to treat UPC and EAN bar codes with supplemental characters
(UPCA+2, for example). The choices are Required, Ignore, or Auto.
The default is Ignore.
Required The scanner scans bar codes with supplemental characters
only. For example, it scans a UPCA+2 bar code, but not
UPCA.
Ignore The scanner ignores supplemental characters. For example,
it scans a UPCA+2 bar code as a UPCA.
Auto Uses scanning information as specified in Scan UPC/EAN
Supplemental Redundancy.