Paxar Monarch TC6039SA User Manual
Page 42
5-4 System Administrator’s Guide
9. Tap the Page 2 tab at the top of the screen to continue. You see
additional options:
10. Set the Preamble, which specifies the characters to preface returned
data from certain bar codes. The Preamble can be up to twenty user-
defined characters.
11. Set the Postamble, which is the data to be sent after each scanned
barcode. The Postamble can be up to twenty user-defined
characters.
12. Set the AIM Duration, which is the duration of the aiming beam when
the scanner is activated. The range is 0.0 - 9.9 seconds in .1-second
increments (0 disables the AIM feature). The default is 0.
13. Set the Linear Security, which is how many times to scan the same
barcode to determine a successful read. The range is 1 – 4. The
default is 1.
14. Enable Bi-Directional Redundancy, which specifies that good scans
must occur in both directions (forward and reverse) for the scan to be
complete.