Paxar Monarch TC6039SA - Manual (Page 53)

Configuring the Scanner 5-15
Configuring Code 93 Bar Codes
1. To configure Code 93 settings, tap Code 93
from the Scanner Configuration screen.
2. Enable each bar code you need to scan.
Code 93 Allows the scanner to scan Code
93 bar codes.
Lengths
Sets the
length(s)
for Code
93 bar
codes. Variable, specifies that Code 93
bar codes can be any length.
Note: Specifying a range of
lengths increases the
likelihood of unsuccessful
scans.
1 Fixed, specifies a single length for valid Code 93 bar
codes. The range for Length 1 is 2 – 99. The default is 4.
2 Fixed, specifies two lengths for valid Code 93 bar codes.
The range for Length 2 is 2 – 99. The default is 55.
3. Tap OK to save all the settings and return to the Scanner
Configuration screen.