Paxar Monarch TC6039SA - Manual (Page 59)

Using Scanner Diagnostics 6-3
S e t t i n g t h e S c a n n e r M o d e
To set the scanner mode without using the Scanner Configuration menu:
1. Tap the printer icon in the System Tray.
2. Set the Scanner Mode: Momentary, Continuous, or Compatible.
Momentary
The scanner is on as long as the trigger is pressed
and goes off when the trigger is released.
Continuous The scanner is always on. A good scan causes the
scanner to reset and continue scanning.
Compatible The scanner operates in Monarch® 6037 
compatible mode. The scanner is on as long as the
trigger is pressed and goes off after a successful
scan or a predetermined timeout period.
Note: A bad scan turns off the scanner and activates the tone (.wav
file) set in Scanner Configuration.
S e t t i n g t h e T r i g g e r M o d e
To set the trigger mode without using Scanner Configuration:
1. Tap the printer icon in the System Tray.
2. Set the Trigger Mode: Scan, Drop, or Forward. The default is
Forward.
Scan
Pressing the trigger activates the scanner.
Drop The printer ignores the trigger press and does NOT
activate the scanner.
Forward The printer passes the trigger press to the application,
which simulates pressing F11.