Paxar Monarch TC6039SA - Manual (Page 29)

Using Printer Diagnostics 4-3
Printing Diagnostic Labels
1. Tap Diagnostic Labels (test labels) from the Print Engine Tests
screen.
2. Before you run these tests, be sure to load your supply in Non-Peel
mode. Refer to the Operator’s Handbook for more information about
loading supply.
Select:
The following labels print:
Information Labels
The first diagnostic (test) label shows the model
number, software version, and the printer’s
configuration by packet. Refer to the Programmer’s
Manual for more information about configuration
packets. The second diagnostic label shows the
model number, software version, total number of
inches printed, voltage, print contrast, printhead
resistance, number of bad dots, and memory.