Panasonic WJ-NT104 - Manual (Page 57)

57
ACCESS AUTHORIZATION
■ Control of Access
Authorization
User access authorization is controlled as follows.
● Unlimited access
If neither user nor host authorization is used (set to
OFF) in a network, all users may perform the following
operations at access level 2.
• Controlling cameras and other equipment connect-
ed to the WJ-NT104
• Monitoring live images
• Monitoring alarm images and querying the log files
• Accessing the data stored in the WJ-NT104
* Accessing the ADMINISTRATOR SETUP PAGE of the
WJ-NT104 requires an administrator account.
● Limited access
• Access is limited according to the host access levels
specified in the HOST SETUP window. The HOST
SETUP window is queried using the IP address of the
host requesting access to the WJ-NT104. When
accessing via a proxy server, the access level there-
fore is determined by the IP address of the proxy serv-
er.
• When access is made from a PC not registered in the
HOST SETUP window, the dialog box shown below
prompts the user to enter User Name and Password.
The access level is determined when both the user
name and password are entered.
■ Access Level
Four access levels can be assigned to control access
by users.
More than one user can be assigned the same access
level. While device control commands are given top
priority in the execution chain, there is no priority
attached to the access level. It is possible to designate
more than one network administrator and to change
designated administrators.
● Administrator (Level 1)
• Access to and setup of ADMINISTRATOR SETUP
PAGE
• Rewriting data stored in the WJ-NT104 using FTP
(File Transfer protocol)
• Controlling cameras and other equipment connect-
ed to the WJ-NT104
• Monitoring live images
• Monitoring alarm images and querying the log files
• Accessing the data stored in the WJ-NT104
● Input Select and operation (Level 2)
• Controlling cameras and other equipment connect-
ed to the WJ-NT104
• Monitoring live images
• Monitoring alarm images and querying the log files
• Accessing the data stored in the WJ-NT104
● Monitoring only (Level 3)
• Monitoring live image.
• Monitoring alarm images and querying the log files
• Accessing the data stored in the WJ-NT104
● Unauthorized level (Level 4)
• Access to the WJ-NT104 is denied.