Installations, Mounting in a rack, Mounting one wj-nt104 with the wv-q204/1 – Panasonic WJ-NT104 User Manual
Page 8: Mounting two wj-nt104 with the wv-q204/2
8
The installation described below should be made by qualified service personal or system installers.
■
Mounting in a Rack
The WJ-NT104 can be mounted in a rack using the optional WV-Q204/1 mounting brackets.
Use of the optional WV-Q204/2 mounting brackets permits mounting up to two WJ-NT104 units in a rack side by side.
INSTALLATIONS
Rubber feet
Rack mounting
bracket (small)
Rack mounting
bracket (large)
Joint metal
Remove 2 screws from
the rear beforehand.
Rack mounting
bracket (small)
Rack mounting
bracket (small)
1. Remove the four rubber feet by removing the four screws from the bottom of the WJ-NT104.
●
Mounting one WJ-NT104 with the WV-Q204/1
2. Fix the mounting brackets (large and small) on both sides of the WJ-NT104 with the eight supplied screws (M3x8) as
shown below.
●
Mounting two WJ-NT104 with the WV-Q204/2
2. Place the joint metals on the WJ-NT104 units as shown below and fix them with the twelve supplied screws (M3x6)
Note:
Remove two screws from the rear of the WJ-NT104 beforehand.
Fix the mounting brackets (small) on both sides of the WJ-NT104 units with the eight supplied screws (M3x8) as shown
below.