Paradyne 3510 - Manual (Page 17)

Introduction
1-5 3510-A2-GN32-60 March 1999
Table 1-1
(2 of 2)
Technical Specifications for Model 3510 and Model 3511 DSUs
Technical Specifications Criteria
PHYSICAL DIMENSIONS
Model 3510
Height
Width
Depth
Weight
Model 3511
Height
Width
Depth
Weight
Rear Connector Plate
Height
Width
Depth
Weight
2.13 inches (5.4 cm)
7.60 inches (19.3 cm)
12.13 inches (30.8 cm)
2.60 pounds (1.2 kg)
7.13 inches (18.1 cm)
1.00 inches (2.5 cm)
13.40 inches (34 cm)
0.73 pounds (0.3 kg)
5.25 inches (13.3 cm)
0.88 inches (2.2 cm)
1.00 inches (2.5 cm)
0.19 pounds (.09 kg)
DTE INTERFACES EIA-232-D/V.24 (ISO 2110) V.35 (ISO 2593)
(Note that the Model 3511 DSU provides an electrical interface,
but a rear connector plate is required for the physical interface.)
NETWORK INTERFACE Full compliance with AT&T Technical Reference 62310, Digital
Data System Channel Interface Specification, November, 1987.
Compatible with the DDS DSU portions of Bell Canada Digital
Circuit Terminating Equipment (DCTE) Specifications,
July, 1989, Issue 1
APPROVALS
FCC Part 15
FCC Part 68
UL
Model 3510
Model 3511, 3000 Series Carrier
CSA
Safety
Model 3510
Model 3511, 3000 Series Carrier
Emissions
Bell Canada
Class A Digital Device
Reg. No. AW2USA-61422-DD-N
Listed UL 1950
Recognized UL 1950
Certified CSA 22.2 No. 220 — M1986
Certified CSA 22.2 No. 950 — M89
CSA 108.8 Class A
“DCTE Specifications,” July 1989, Issue 1