Panasonic AV-HS400AE - Manual (Page 27)

7
3. Basic operations
3-2-4. Setting the wipe start position
Any start position can be set for wipe pattern WIPE and SQ #.
The start position has one set of values for a background pattern and another set for a key pattern.
1 Press the [FUNC] button to light its indicator, and press the [WIPE] button to display the WIPE menu.
2 Turn [F1] to display the WIPEPos sub menu or the SQPos sub menu.
<Menu display>
WIPEPos Select X-Pos Y-Pos CopyTo↓
3/5 BKGD 0.00 0.00 KEY
KEY −100.00
|
+100.00
−100.00
|
+100.00
3 Turn [F] to select the pattern (background or key) to be set using the Select item.
4 Either operate the positioners or turn [F3] and [F4] to set the wipe start position using the X-Pos item and
Y-Pos item.
These settings can be established only when WIPE or SQ # has been selected as the background pattern
or key pattern.
5 Either operate the fader lever or press the [AUTO] button to check the wipe operation.
(When, for instance, –0 has been set for X-Pos and –0 for Y-Pos, the following screen (or key) appears
from the bottom left and wipe is performed while the screen (or key) moves to the screen centre.)
<X-Pos, Y-Pos setting range>
Inside screen area
Outside screen area
6 To copy the start position settings, press [F].
The copy destination appears under the CopyTo item. (It will not change even if [F] is turned.)