Panasonic AV-HS400AE - Manual (Page 94)

94
5. System settings
Example of connections (when the unit and a pan-tilt head are connected)
Pan-tilt heads that can be connected: AW-HE100N/E, AW-PH400E, AW-PH40E, AW-PH360L
 Connections for AW-HE100N/E, AW-PH405E or AW-PH360L
POWER
1
REF
GPI
SLOT2
2 SLOT
4
2
3 4 SLOT1
1
SLOT2 8
～ IN
SDI INPUTS TALLY
6 6
INPUTS
SIGNAL
SDI OUTPUTS
GND IN OUT
3
IN OUT
2
IN OUT
1
IN OUT
OUTPUTS
1
5 7
SLOT OFF 2
SLOT1 5
SLOT SLOT
PGM RS-422 LAN
ON
ANALOG INPUTS Y Pb Pr Y Pb Pr
DVI INPUTS
ANALOG OUTPUTS Y Pb Pr Y Pb Pr
DVI/ANALOG OUTPUTS Y Pb Pr DVI-I DVI-I DVI-I
Analogue component signals
(For the connection specifications, refer to the
Operating Instructions of the AW-HE100N/E.)
Analogue Input Board
CONTROLLER connector
Cable length: Max. 00 m
Twisted pair cable (AWG4)
AV-HS400AE
AW-HE100N/E
<Connection specifications>
 
1 FRAME GND
2 TXD –
3 RXD +
4 GND
5
6
GND
7 TXD +
8 RXD –
9 FRAME GND
NC
1
2
3
4
5
6
7
8
RXD –
GND
TXD –
RXD +
TXD +
RS-422
CONTROLLER
(CONTROL IN IP/RP)
1 2 3 4 5
9 8 7 6
1.......8
Pin No. Signal Pin No. Signal
AV-HS400AE AW-HE100N/E, AW-PH405E, AW-PH360L
 : Twisted pair cable
When the AW-HE100N/E is to be connected to the unit, select a setting which will enable operations to be
controlled by the controller in the “Controller” item of the AW-HE100N/E’s pan-tilt head unit setting menu
(

Pan Tilt Head Setting

).
For further details, refer to the Operating Instructions of the AW-HE100N/E.