Panasonic AV-HS400AE - Manual (Page 56)

6
3. Basic operations
3-11. Frame memories
Still images can be stored in the unit’s two internal frame memories for use.
The still images are transferred to the frame memories through the AUX bus and an SD memory card.
Conversely, the images in the frame memories can be transferred to an SD memory card.
Images in the frame memories can be used as bus images by assigning FMEM1 and FMEM using the crosspoint
assignment function.
Since the images stored in the frame memories are stored in the unit’s RAM area, the image data is erased once
the power is turned off.
Transfer them again after the power has been turned back on.
3-11-1. Transferring images from the AUX bus
1 Press the [FUNC] button to light its indicator, and press the [MEMORY] button to display the MEMORY
menu.
2 Turn [F1] to display the FMEM sub menu.
<Menu display>
FMEM Signal Store Review Exec↓
2/4 AUX FMEM1 Off
FMEM2 On
3 Turn [F3] to select the frame memory in which to store the images using the Store item.
4 Turn [F4] to select on or off for the review display setting using the Review item.
On: After the image is imported, the FMEM1 or FMEM image is displayed (for  seconds) in the AUX bus.
Even during review display, the next image can be imported.
Off: No review display.
5 Press the [F] switch (Exec) to import the still images to the frame memory.
The still images can also be imported using the user buttons.
“StrFM1” and “StrFM” have been allocated to the user buttons (  See -3-1.), and when one of these
buttons is pressed, it will light for an instant, and the still image is then imported.
PGM
FMEM1 FMEM2
AUX
PGM
INPUT1 INPUT2 INPUT3 INPUT4
INPUT5 INPUT6 FMEM1 FMEM2
AUX
PGM
FMEM2
AUX
PGM
INPUT1 INPUT2 INPUT3 INPUT4
INPUT5 INPUT6 FMEM1 FMEM2
AUX USER
1 2
Importing to FMEM1
Review display
Imported still image