Panasonic AV-HS400AE - Manual (Page 60)

60
3. Basic operations
3-12-3. Loading data from SD memory cards
1 Insert the SD memory card on which the data is stored into the SD memory card slot.
Load the file after its data has been stored in the each folder. Data stored in other folders will not be
recognized by the unit.
System data: “HS400/SYSTEM” folder
Still image data: “HS400/IMAGE” folder
2 On the MEMORY menu, turn [F1] to display the SDCard sub menu.
3 Turn [F] to select “Load” using the Mode item, and then press the [F] switch.
<Menu display>
SDCard Mode↓ Select LoadFile Exec↓
3/4 Load FMEM1 HS070531100000
FMEM2
System
4 Turn [F3] to select the transfer destination using the Select item.
5 Using the LoadFile item, turn [F4] to select the name of the file to be loaded.
6 If the [F] switch is now pressed, the file is loaded from the SD memory card and stored in the unit’s internal
memory.
While the file is being loaded, the following message and filename are displayed.
SDCard ∙∙∙Loading File∙∙∙
3/4
HS070531100000
 Up to 100 files can be loaded.
 The following alphanumerics and symbols can be used as the characters for filenames (see below).
Files using other characters will not be displayed by the unit.
<Characters which can be used for filenames>
A to Z, a to z, 0 to 9, Space, ! # $ % & ' ( ) + , - . ; = @ [ ] ^ _ ` { }