Panasonic AV-HS400AE - Manual (Page 63)

63
4. Input/output signal settings
4-1-2. Setting the input mode
The mode can be set for each input only when HD has been selected as the system format.
When SD is selected as the system format, the input mode is always the same as Normal.
Normal: Input signals in conformity with the system format take effect.
D by D: When SD signals with the same frame rate as the system format have been input, they are input on a
dot by dot (1  magnification) basis with no up-conversion.
(This setting is only possible when the system format is 1080i.)
In this mode, there is minimal deterioration in the image quality and, as such, the mode is used to
combine SD format material using the PinP function.
UC: When SD signals with the same frame rate as the system format have been input, they are
up-converted. (This mode can be selected for inputs  to 8 only.)
Auto: Input signals in conformity with the system format take effect.
Furthermore, if SD signals with the same frame rate as the system format are input when HD is
selected as the system format, they are up-converted. (This mode can be selected for SDI inputs  to
8 only.)
 In the Auto mode, the images may be disturbed when the input signals are switched.
1 On the Input sub menu, turn [F] to select the input signals using the Signal item.
2 Turn [F4] to set the input mode using the Mode item, and press the [F4] switch to enter the selection.
An asterisk (  ) appears at the left of the input mode currently selected.
<List of input modes supported>
System Mode
Input
480/59.94i 576/50i 1080/59.94i 1080/50i 720/59.94p 720/50p
SD 480/9.94i —
○ ■ ■ ■ ■ ■
76/0i —
■ ○ ■ ■ ■ ■
HD 1080/9.94i Normal
■ ■ ○ ■ ■ ■
D by D
○ ■ ■ ■ ■ ■
UC
○ ■ ■ ■ ■ ■
Auto
○
(UC)
■ ○ ■ ■ ■
1080/0i Normal
■ ■ ■ ○ ■ ■
D by D
■ ○ ■ ■ ■ ■
UC
■ ○ ■ ■ ■ ■
Auto
■ ○
(UC)
■ ○ ■ ■
70/9.94p Normal
■ ■ ■ ■ ○ ■
UC
○ ■ ■ ■ ■ ■
Auto
○
(UC)
■ ■ ■ ○ ■
70/0p Normal
■ ■ ■ ■ ■ ○
UC
■ ○ ■ ■ ■ ■
Auto
■ ○
(UC)
■ ■ ■ ○
  denotes a black screen.
 The UC mode or Auto mode cannot be selected for inputs 1 to 4.
 If D by D, UC or Auto mode is selected, the frame synchronizer will be turned on.
 The input mode cannot be changed when freeze is set to on.