Panasonic AJ-D750P - Manual (Page 36)

Automatic editing
Modifying the edit points
Re-entering the edit points
Search for the new edit point by performing the jog or shuttle operation, and press the
IN (or OUT) and SET buttons together to re-enter the edit point.
Modifying the edit point in frame units (trim function)
Press the TRIM button while holding down the IN (or OUT) button.
The edit point is put ahead by 1 frame each time the + button is pressed.
The edit point is put back by 1 frame each time the – button is pressed.
Resetting the edit points
3-1
Resetting both the edit IN and OUT points
Press the RESET button.
3-2
Resetting either the edit IN or OUT point
Press the RESET button while holding down the IN (or OUT) button.
<Notes>
Edit points can be reset only in the CTL mode.
An edit OUT point can be reset even while editing is in progress.
The IN and OUT points are automatically reset during the eject mode.
3-
1,
3 -
2
1
2
- 3 6 -