Panasonic AJ-D750P - Manual (Page 44)

Setup (setting) menus
SYSTEM menu
<SYSTEM>
Item Setting
No.
Superimposed No. Superimposed
display display
Description
0 0 SYS SC
0 1 SYS H
0 2 VIDEO
PHASE
0 3 YC
COARSE
0 4 YC FINE
05 S C H
COARSE
0 6 SCH FINE
07 P B OUT LV
08 P R OUT LV
10 AV PHASE
0000 –127
0127 0
0255 128
0000 – 3 0
0032 0
0060 30
0000 –32
0032 0
0064 32
0000 – 2
0002 0
0004 2
0000 – 2
0002 0
0004 2
0000 0
0001 90
0002 180
0003 270
0000 –124
0128 0
0255 123
0000 –124
0124 0
0247 123
0000 –124
0124 0
0247 123
0000 –128
0128 0
0255 127
System phase adjustment: Total variable range: ±180° or
more
–: Advanced
+: Delayed
<Note>
When shipped from the factory, the setting values do not
change even if setting operations are performed.
System phase adjustment: SC cycle phase (280 ns steps)
–: Advanced
+: Delayed
<Note>
When shipped from the factory, the setting values do not
change even if setting operations are performed.
Video phase adjustment: 148 ns steps
–: C advanced
+: C delayed
YC timing rough adjustment: 148 ns steps
–: C advanced
+: C delayed
YC timing fine adjustment: 37 ms steps
–: C advanced
+: C delayed
(The digital OUT option YC does not change.)
SCH phase adjustment: 90° units
(The S and C phases change but the H phase does not
change.)
SCH phase adjustment: Total variable range: ±45° or more
(The S and C phases change but the H phase does not
change.)
Component P B output level adjustment: Total variable range :
±3 dB
Component P R output level adjustment: Total variable range :
±3 dB
This adjusts the audio output phase with respect to the video
output: 20.8 s steps
–: The audio output phase is advanced with respect to the
video output.
+: The audio output phase is delayed with respect to the
video output.
The underline on the setting item denotes the initial setting.
- 4 4 -