Panasonic AJ-D750P - Manual (Page 4)

General and Features
This unit is a digital video cassette recorder which uses 1/4-inch tapes.
It incorporates digital compression technology so that the deterioration in picture quality and
sound quality resulting from dubbing is significantly minimized compared with existing
analog systems.
Furthermore, since it has a compact 4U size and light weight, the unit can be carried around
or mounted in a 19-inch rack with ease.
The settings for the units setup can be performed interactively while viewing the screen
menus on the TV monitor, and editing functions include both assemble and insert editing.
Features
Compact size and light weight
This is a 4U size digital VTR. It can be mounted in a 19-inch rack with ease using the
optional rack-mounting adaptors (AJ-MA34HP).
Up to 123 minutes of recording
Two sizes of cassette tapes can be used with this unit: the news-gathering cassette (max.
63 minutes) and general purpose cassette (max. 123 minutes). The width of the tapes
measures 1/4 inch to achieve a compact design.
Compatibility with consumer products
Consumer cassette tapes shot with digital cameras available on the consumer market can
be played back on this unit using the optional cassette adaptor (AJ-CS750P).
<Note>
Slow playback of consumer cassette tapes will not produce the smooth operation produced
by slow playback of DVCPRO cassette tapes.
Digital slow motion/jog
Digital slow-motion technology created originally by Panasonic enables noiseless images to
be played back from speeds ranging from still picture to approx. ±1/2 × normal tape speed.
<Note>
Some noise may occur when the slow motion speed is changed.
Time codes
This unit comes with a built-in time code generator (TCG)/time code reader (TCR). In
addition to the internal time code, time code facilities include external time code input as well
as recording of the input signal VITC code.
Multi-function input/output interfaces
Analog input/output
Component (Y, P B , P R ) and composite signal input and output connectors are provided.
Serial digital input/output
Digital component interfacing complying with the SMPTE 259M-C/272M serial digital signal
standard is possible when the optional component serial interface board (AJ-YA750P) is
used.
AES/EBU audio input/output
Digital audio input and output connectors are provided.
9-pin (RS-422A)/(RS232C) remote
In addition to the standard 9-pin serial (RS-422A) connector, RS-232C and 25-pin parallel
connectors are also featured.
The RS-422A connector enables another VTR to be operated in parallel with the unit if a
looping connection is used for the two units.
2-channel high-sound-quality digital audio
Sound can be edited separately for two channels while channel mixing capabilities are also
available. One channel is provided for the analog cue track.
- 4 -