Panasonic AJ-D750P - Manual (Page 50)

USER menu
<EDIT> (continued)
Item
No.
Superimposed
display
306 EDIT
RPLCE2
307 EDIT
RPLCEC
308 CONFI
EDIT
309 AUD EDIT
IN
310 AUD EDIT
OUT
311 AUTO
ENTRY
312 CF ADJ
SEL
313 AFTER
CUE-UP
Setting
No.
Superimposed
display
N-DEF
CH1
CH2
CH1+2
Description
0000
0001
0002
0003
This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CH2 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
0000 N-DEF
0001 CH1
0002 CH2
0003 CH1+2
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
OFF
ON
CUT
FADE
CUT
FADE
DIS
ENA
PLAYER
RECORD
STOP
STILL
This selects the channel concerned when the VTR CUE edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the editor or
controller.
0: Not set.
1:
Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
This selects whether to conduct simultaneous playback while
editing is in progress.
0: No simultaneous playback
1: Simultaneous playback
<Note>
Simultaneous playback is valid when the TAPE/EE switch is
set to TAPE.
This selects the connection method for the digital audio edit
IN point.
0: Cut processing
1: V Fade processing
This selects the connection method for the digital audio edit
OUT point.
0: Cut processing
1: V Fade processing
This selects whether the IN point is to be entered using the
PREROLL button when it has not been entered.
0: IN point is not entered.
1: IN point is entered.
This selects the CF adjustment deck with deck-to-deck
editing.
0: The player’s edit IN/OUT points are adjusted. (reference as
the RECORDER side)
1: The recorder’s edit IN/OUT points are adjusted. (reference
as the PLAYER side)
This selects the mode after cue-up operation is complete.
0: STOP mode
1: SHTL STILL mode
The underline on the setting item denotes the initial setting.
- 50 -