Video menu, Setup menus, User menu – Panasonic AJ-D750P User Manual

Page 54: Video

Advertising
background image

Setup menus

USER menu

<VIDEO>

Item Setting

No.

Superimposed

No.

Superimposed

display

600 P

B

/ P

R

IN LV

601 INT BB

SIG

0000
0001

0000
0001

0000
0001

0000
0001

0000
0001

0000
0001

0000
0001

0000
0001
0002

0000

0001

0000
0001

0000
0001

0000
0001

display

M

II

B-CAM

OFF

BB

602 INPUT

C KILL

603 OUT

VSYNC

604 V-MUTE

SEL

605 CC (F1)

BLANK

606 CC (F2)

BLANK

607 CF ID

SEL

608 FREEZE

SEL

609 IN FRM

DET

610 OUT C

KILL

611 EDH

B/W

AUTO

N-VF

VF

N-MUTE
LOW RF

BLANK

THRU

BLANK

THRU

OFF

ON

AUTO

FIELD

FRAME

FORCED

AUTO

B/W

COLOR

OFF

ON

Description

This selects the component input signal level.
0: Mll level.

1: cam level.

This selects whether to generate the internal black burst
signal.
0: Signal is not generated.

1: Signal is generated.

This selects color killer processing for the video input signals.
0: The signals are forcibly processed as B/W signals.

1: The signals are automatically processed.

This selects whether to float the vertical sync position of the
video output in order to align the video output phase with the
input in the EE/record/edit modes.
0: Signals are not floated.

1: Signals are floated.

This selects whether the video output signals are to be muted
when the LOW RF or servo lock release condition occurs
during playback.
0: No muting. (Freeze)

1: Muting. (Set to gray.)

This selects ON or OFF for the closed capture signal in the
first field.
0: Forced blanking performed.

1: Blanking not performed.

This selects ON or OFF for the closed capture signal in the
second field.
0: Forced blanking performed.

1: Blanking not performed.

This selects whether to disable the CF ID in the component
and SIG PB OUT.
0: ID is not added.

1: ID is forcibly added.

2: ID is added when the CF lamp is lighted.

This selects the freeze mode for still pictures.
0: Field freeze.

1: Frame freeze.
<Note>

When frame freeze has been selected, the frame slow status
is established with the slow setting.

This selects the conditions under which frame detection is to
be performed when signals are input.
0: Frame detection is performed at all times.

1: Frame detection is prohibited only when non-standard

signals are input.

This selects chroma color killer processing for the video
output signals.
0: The signals are forcibly processed as B/W signals.

1: The signals are automatically processed.

This selects whether to superimpose EDH onto the serial
output signals.
0: EDH is not superimposed.

1: EDH is superimposed.

This is not displayed when the optional serial interface board

has not been installed.

The underline on the setting item denotes the initial setting.

- 54 -

Advertising