Panasonic AJ-D750P - Manual (Page 62)

Servo reference
This unit automatically selects the input video signal selected by the INPUT switch, the
reference video signal supplied from the REF VIDEO input connector or the internal sync
signal as the servo reference signal.
When the signal is selected, the unit’s mode and servo reference stand in the relationship
shown in the flowchart presented below.
What is the SERVO REF on the setup
menu No. 304 setting?
AUTO
Is the unit in the recording mode?
NO
Is the unit in the editing mode?
(Is VIDEO, CH1, CH2, CUE or TC
selected?)
NO
Is the REF VIDEO signal supplied?
YES
EXT
YES
YES
NO
Is the input video signal
available?
YES
NO
The REF VIDEO input The internal sync signal
signal serves as the serves as the reference
reference signal. signal.
The input video signal
serves as the reference
signal.
- 62 -