Printronix P9000 Series - Manual (Page 138)

Programming 6-40
Extended Character Set Cancel (Primary Character Set Select)
ASCII Hex Decimal
P-Series SI (Shift In) 0F 15
SFCC SI SFCC 0F SFCC 15
SFCC o SFCC 6F SFCC 111
SFCC 5 SFCC 35 SFCC 53
Serial ESC 5 1B 35 27 35
Purpose Cancels Extended Character Set as selected by SO, SFCC SO, SFCC n, SFCC
4 and ESC 4, and selects the Primary Character Set.
Comment Used in 7-bit systems. If data bit 8 is disabled, this control code selects the
range as if data bit 8 is set to 0, and data is printed as characters from 20 to 7F
hex.
Example Refer to the Extended Character Set example on the previous page.