Printer deselect – Printronix P9000 Series User Manual
Page 159
Advertising
6-61
Programming
Printer Deselect
ASCII
Hex
Decimal
P-Series
N/A
N/A
N/A
Serial
DC3
13
19
Purpose
Places printer in the deselected state.
Comment
When the configuration parameter PRINTER SELECT is enabled, this conĆ
trol code will disable the printer from receiving and printing data from the
host. Until a DC1 (Printer Select) command is received, all subsequent data
to the printer is ignored.
NOTE: When the configuration parameter PRINTER SELECT is enabled and saved in
NOVRAM, the printer will power up in the deselected state.
Advertising