Printronix P9000 Series - Manual (Page 155)

6-57 Programming
Printer Reset
ASCII Hex Decimal
P-Series SFCC @ SFCC 40 SFCC 64
Serial ESC @ 1B 40 27 64
Purpose Initializes all print mode related parameters to values previously saved.
Comment When reset to the previously saved values, the current line is set to the top-
of-form position. Print mode, line spacing, international language selection,
form length, skip-over perforation, and character pitch are reset to previĆ
ously saved values. Character-by-character and line-by-line attributes
are canceled. The vertical format unit is cleared. Interface parameters and
protocol mode (P-Series or Serial Matrix) are not affected.
In the Serial Matrix protocol, this command will set horizontal tabs at every
eighth character column.