Printronix P9000 Series - Manual (Page 139)

6-41 Programming
Form Feed
ASCII Hex Decimal
P-Series/
Serial FF 0C 12
Purpose Prints the data in the buffer, advances the paper to the next top-of-form,
and moves the printhead to the first character column.
Comment The default forms length is determined by the configuration in nonvolatile
memory. Forms length is set by using the control panel F/L switch or forms
length control codes. Code FF cancels all single-line only print attributes.
The Form Feed command will react differently in the P-Series and Serial
Matrix emulation modes when the VFU is active. Refer to the Vertical ForĆ
mat Units chapter.