Turn off the voice command setting, Adjust the screen brightness, Adjust the automatic power off setting – Palm 700wx User Manual

Page 223: Screen, The screen appears blank

Advertising
background image

T R O U B L E S H O O T I N G

S C R E E N

215

10

CH

AP

T

E

R

Turn off the Voice Command setting

1 Press Start

and select Settings.

2 Select the Personal tab and then select

Voice Command

.

3 Uncheck the Enabled box.

4 Press OK

.

Reduce the amount of time the backlight
stays on when not in use

1 Press Start

and select Settings.

2 Select the System tab, and then select

Backlight.

3 Set the time interval on the Battery

Power tab and on the External Power
tab.

4 Press OK

.

Adjust the screen brightness

1 Press Option

, and then press

.

2 Press Left

and

Right to adjust the

brightness.

3 Press OK

.

Adjust the automatic power off setting

1 Press Start

and select Settings.

2 Select the System tab, and then select

Power

.

3 Select the Advanced tab and set

whether your smartphone turns off
automatically after a specified period of
inactivity while on battery power.

4 Press OK

to finish.

Screen

The screen appears blank

1 When the time period specified in

Backlight Settings expires, the screen
dims; one minute later, the screen
automatically turns off. Press any key
except Power/End to wake up the
screen. Pressing Power/End hangs up
the call.

2 Look closely at the screen. If you can

see a dim image, try adjusting the
screen brightness (see Adjusting the
brightness).

3 If that doesn’t work, perform a soft

reset (see Performing a soft reset).

Advertising