Palm 680 - Manual (Page 130)

Y O U R C O N N E C T I O N S T O T H E W E B A N D W I R E L E S S D E V I C E S
124
5
CH
AP
T
E
R
6 Select Add Device. The Discovery icon
appears, indicating that the discovery
process is active.
7 Select the Show pick list and select
Nearby devices.
8 If the device you want to add doesn’t
appear on the Discovery Results list,
make sure that the other device is ready
to receive a connection request (see the
device’s documentation), and then
select Find More on your Treo to search
again.
9 Enter the same passkey on your Treo
680 and on the Bluetooth device, and
select OK.
IMPORTANT Some Bluetooth devices
have a preset passkey; if so, you can find
the passkey in the documentation for that
device. Other devices provide a screen
where you enter a passkey that you make
up. In either case, you must use the same
passkey on both your Treo 680 and the
other Bluetooth device. We recommend
that where possible, you make up a
passkey of 16 alphanumeric characters
(letters and numerals only) to improve the
security of your Treo. The longer the
passkey, the more difficult it is for the
passkey to be deciphered.
10 Select Done.
Accepting a connection from another
Bluetooth device
1 Press Applications and select
Bluetooth .
TIP For the Treo 680 to be visible to Bluetooth
devices, the Bluetooth setting must be set to
On and visibility must be set to Visible or
Temporary.