Palm 680 - Manual (Page 21)

S E T T I N G U P
15
1
CH
AP
T
E
R
Making your first call
1 Press Phone .
2 If prompted, press Center to turn
off Keyguard (see Locking your
keyboard (Keyguard) for more info).
3 Press Left to select the Dial Pad
tab.
4 Tap the onscreen Dial Pad to enter the
number you want to call.
5 Press Send to dial the number.
6 If prompted, press Center to select
Yes and turn on your phone.
7 After you finish the call, press Power/
End to end the call.
Adjusting call volume
While a call is in progress, press the
Volume button on the side of your Treo
680 to adjust the call volume.
• To increase the volume, press the upper
half of the Volume button.
TIP If Check SIM Card appears in the title bar,
see Inserting the SIM card and battery.
TIP If No Service appears in the title bar,
you’re outside a wireless coverage area. If you
believe you are in a wireless coverage area
and this problem persists, contact Cingular
Wireless for assistance.
Center
TIP If you are inside a coverage area and
cannot complete a call, contact Cingular
Wireless for assistance.