Palm 680 - Manual (Page 242)

C O M M O N Q U E S T I O N S
236
11
CH
AP
T
E
R
• If a message arrives but does not
display an alert, perform a soft reset
(see Performing a soft reset).
Web
I can’t tell if data services are available
When your phone is on, icons appear in the
title bar in the Main tab in the Phone
application to indicate whether data
services are available and whether a data
connection is active. Make sure that either
of the following icons appears in the title
bar of the Main tab:
. If you do not
see either of these icons, data services are
not available in your current location and
you cannot connect to the Internet.
My Treo won’t connect to the Internet
Your Treo 680 supports GPRS and EDGE
wireless data networks. To connect to the
Internet, you must subscribe to and
activate data services with Cingular
Wireless, and you must be in a location
with data coverage.
1 Press and hold Power/End to
turn off your phone. Then press
and hold the same button to turn it back
on again.
2 Press Phone and look for either of
the following icons in the title bar of the
Main tab:
.
3 If you see these icons, you are in a data
coverage area. Try connecting to the
Internet again. If you do not see either
of these icons, press Applications ,
select Prefs
, and continue with the
following steps.
4 Select Network.
5 Select the Service pick list and select
MEdia Net.
6 Select Connect.
7 If the connection is successful, go the
web browser. If you still can’t make a
connection, perform a soft reset (see
Performing a soft reset).
8 If your phone did not turn on
automatically after the soft reset, press
and hold Power/End
to turn on
your phone, and try connecting to the
Internet.