Palm 680 - Manual (Page 74)

Y O U R P H O N E
68
3
CH
AP
T
E
R
earpiece on your Treo. When a call comes
in, your Treo 680 rings and the hands-free
device beeps. Even if you answer the call
on your Treo, the call goes to the
hands-free device. If you prefer to route
calls to the earpiece on your Treo, you can
change the settings on your Treo 680 to do
this; see Customizing advanced settings
for your hands-free device for details.
The features of your hands-free device vary
by model. Check the documentation for
your hands-free device for details about
these features. Your Treo 680 can support
the following actions, provided that your
hands-free device also supports them:
•
Answer an incoming call
• Hang up a call and answer a call-waiting
call
• Place a call on hold and answer a
call-waiting call
• Hang up a single call
• Transfer an outgoing call from the
earpiece on your Treo to the hands-free
device
•
Ignore an incoming call
•
Redial the last number you called from
the hands-free device
Customizing advanced settings for your
hands-free device
You can set whether your hands-free
device automatically answer calls, provided
the device supports this feature.
1 Press Applications and select
Prefs .
2 Select Hands-free.
TIP If you’re using a Bluetooth hands-free
device and you want to return to the earpiece
or a wired headset during a call, select Cancel
Bluetooth in Active Call View. To return the
call to the hands-free device, open the
Options menu and select Connect
Bluetooth. DID YOU KNOW ? If you have more than one
Bluetooth hands-free device, the last one you
connected to becomes the active device. To
switch between devices, turn off the active
device before you try to connect to the other
device.