Philips KX-TAW848 - Manual (Page 101)

2.11 Starting the PBX
Installation Manual 101
2. Plug the DC connector of the AC adaptor into DC IN 1.
3. Plug the AC cord into the AC adaptor, and then plug the other end into an AC outlet.
4. Turn on the power switch. The RUN indicator will flash.
Notes
• For safety reasons, follow the procedures as indicated when turning on the PBX.
• For safety reasons, do not stretch, bend, or pinch the AC cord and the DC cable of the AC adaptor.
AC Adaptor
DC Connector
DC IN 1
2
1
AC Adaptor
AC Cord
To AC outlet
Power Switch