1 troubleshooting, 1 installation – Philips KX-TAW848 User Manual

Page 112

Advertising
background image

4.1 Troubleshooting

112

Installation Manual

4.1

Troubleshooting

4.1.1

Installation

PROBLEM

PROBABLE CAUSE

SOLUTION

Extension does not operate.

Bad extension card.

•

Exchange the card for a known working
one.

Bad connection between the
PBX and telephone.

•

Take the telephone and plug it into the
same extension port using a short
telephone cord. If the telephone works,
then the connection between the PBX
and the telephone must be repaired.

A telephone with an A-A1 relay
is connected.

•

Use a 2-wire cord.

•

Set the A-A1 relay switch of the
telephone to the "OUT" or "OFF"
position.

Bad telephone.

•

Take the telephone and plug it into
another extension port that is working.
If the telephone does not work, replace
the telephone.

The PBX does not operate
properly.

•

Press the Reset Button (refer to "4.1.4
Using the Reset Button"
).

•

Turn off the power switch, and then turn
it back on.

•

Turn off the power switch, and then
unplug the PBX. After 5 minutes, plug
the PBX back in and turn the power
switch back on.

Noise on external paging.

Induced noise on the wire
between the PBX and the
amplifier.

•

Use a shielded cable as the connection
wire between the PBX and amplifier. A
short shielded cable is recommended.

Distorted external music.

Excessive input level from
external music source.

•

Decrease the output level of the
external music source by using the
volume control on the music source.

Alternate Calling—Ring/Voice
and Live Call Screening (LCS)
do not function as set when using
a Wireless Phone (KX-T7880/
KX-T7885/KX-TD7894/KX-
TD7895).

Voice-calling mode and Hands-
free mode with LCS are not
available with Wireless Phones.

•

Switch the calling mode to ring-calling.

•

Set the LCS mode to "Private".

The ALARM indicator on the
front of the cabinet turns on red.

A major system error occurs in
the PBX.

•

See the error log using the KX-TAW848
Maintenance Console (refer to "4.1.5
Troubleshooting by Error Log
").

Advertising