Registering the ps, System lock password, Entering the system programming mode – Philips KX-TAW848 User Manual
Page 85
2.7 Connection of 2.4 GHz Portable Stations
Installation Manual
85
Registering the PS
The PS must be registered to the PBX before it can be used. Programming of both the PS and PBX is
required. An APT with multiline display (e.g., KX-T7735) is required for the PBX system programming.
Note
For details about system programming using an APT, refer to "2.3.2 PT Programming" and "3.3 PT
Programming" in the Feature Guide.
Entering the System Programming Mode
APT (Administrator Level)
PS (Using the KX-TD7680)
PS (Using the KX-TD7690)
Note
means default value throughout this section.
#
= 1234
System Password for Administrator—
for PT Programming
Programming No.
3 digits
PROGRAM/
PAUSE
System Setting Menu
Select
"SYSTEM SET".
Press POWER
for 2 seconds.
Select
"PS PROGRAM".
4 digits
System Lock Password
If required
FUNC
System Setting Menu
Select
"SYSTEM SETTING".
Press POWER
for 2 seconds.
S1
S1
MENU
SEL
S1
SEL
Select
"PS PROGRAM".
4 digits
System Lock Password
If required
ENTR
S1