Printronix P7000 H-Series - Manual (Page 39)

Beeper
39
Where:
[;F
q data q] = secondary data field (optional). The secondary
data field is only used to specify the barcode data when the
primary data field is empty (two delimiters without any data).
When the primary data field is not empty, the secondary data
field is ignored.
Beeper
ASCII Code BEL
Hex Code 07
Dec Code 7
Purpose Sounds the printer’s beeper for 1/10 second.
Cancel Line
ASCII Code CAN
Hex Code 18
Dec Code 24
Purpose Clears all printable characters and bit-image graphics on the
current line.
Moves the print position to the left-margin position.
Carriage Return
ASCII Code CR
Hex Code 0D
Dec Code 13
Purpose Moves the print position to the left margin position.
Comment The user can define CR = CR or CR = CR + LF from the front
panel.
If CR = CR + LF, the CR command is accompanied by a LF
command.