Printronix P7000 H-Series - Manual (Page 71)

Set Page Length In Inches
71
Set Page Length In Inches
ASCII Code ESC C NUL n
Hex Code 1B 43 00 n
Dec Code 27 67 0 n
Purpose Sets the page length to n inches.
This command sets the page length in 1-inch increments only.
Sets the page length before paper is loaded or when the print
position is at the top-of-form position. Otherwise, the current
print position becomes the top-of-form position.
Where:
1 <=
n <= 22
Comment Setting the page length cancels the bottom margin setting.
This command affects the front panel setting of “Abs. Length
In.”
Set Page Length In Lines
ASCII Code ESC C n
Hex Code 1B 43 n
Dec Code 27 67 n
Purpose Sets the page length to n lines in the current line spacing.
Sets the page length before paper is loaded or when the print
position is at the top-of-form position. Otherwise the current
print position becomes the top-of-form position.
Where:
1<=
n <= 127
0 < n *(current line spacing) <= 22 inches
Comment Setting the page length cancels the bottom margin setting.
Changing the line spacing does not affect the current page-
length setting.
This command affects front panel setting of “Funct. Of Lines.”