Printronix P7000 H-Series - Manual (Page 48)

48
Chapter 3 Configuring The KSSM Emulation With Control Codes
Master Select In DBCS Mode
ASCII Code FS ! n
Hex Code 1C 21 n
Dec Code 28 33 n
Purpose Selects any combination of several font attributes and
enhancements by setting or clearing the appropriate bit in the
n parameter, as shown below:
Where:
0 <=
n <= 255
Comment This command cancels any attributes or enhancements that
are not selected.
Bit On/Off Hex Dec Function Equivalent
0 Off 00 0 Cancel vertical printing FS K
On 01 1 Select Vertical printing FS J
1 Off 00 0 Cancel half width FS DC2
On 02 1 Select half width FS SI
2 Off 00 0 Cancel double width ESC W 0
On 04 1 Select double width ESC W 1
3 Off 00 0 Cancel double height FS X 0
On 08 1 Select double height FS X 3
4 Off 00 0 Select quarter printing FS r n
On 10 16 Cancel quarter printing FS DC2
5 Off 00 0 Select superscript FS r 0
On 20 32 Select subscript FS r 1
6 Off 00 0
On 40 64
7 Off 00 0 Cancel underline FS - 0
On 80 128 Selects underline FS - 1