Printronix P7000 H-Series - Manual (Page 67)

Set Absolute Horizontal Print Position
67
Set Absolute Horizontal Print Position
ASCII Code ESC $ n1 n2
Hex Code 1B 24 n1 n2
Dec Code 27 36 n1 n2
Purpose Moves the horizontal print position to the position specified by
the following formula:
Horizontal position = n1 + (n2 * 256) + left margin.
Where:
0 <=
n1 <= 127
0 <= n2 <= 255
The unit setting for this command is 1/60 inch.
Comment The printer ignores this command if the specified position is to
the right of the right margin.
Set Bottom Margin
ASCII Code ESC N n
Hex Code 1B 4E n
Dec Code 27 78 n
Purpose Sets the bottom margin on continuous paper to n lines (in the
current line spacing) from the top-of-form position on the next
page.
Where:
1 <=
n <= 127
0 < n *(current line spacing) < page length
Comment This was formerly called the “Set skip-over-perforation”
command.
This command affects the front panel setting of “Bottom
Margin.”
The default depends on the power-up configuration.
Cancel Bottom Margin
ASCII Code ESC O
Hex Code 1B 4F
Dec Code 27 79
Purpose Cancels the bottom margin settings.
Comment This was formerly called the “Cancel skip-over-perforation”
command.
This command affects the front panel setting of “Bottom
Margin.”