Printronix P7000 H-Series - Manual (Page 9)

9
1
Introduction
About This Manual
This manual is designed so you can quickly find the information you need to
operate your printer with the Korean Standard (KS) emulation.
This book does not explain how to operate the printer. For printer operation,
see the
User’s Manual.
Warnings And Special Information
Read and comply with all information highlighted under special headings:
WARNING Conditions that could harm you.
CAUTION Conditions that could damage the printer or related equipment.
IMPORTANT Information vital to proper operation of the printer.
NOTE: Information affecting printer operation.
Related Product Information
Refer to the following book for printer operation:
• User’s Manual. Provides configuration instructions, descriptions, and
troubleshooting guidelines. Also describes the keys on the control panel
and provides quick reference information on daily printer operations such
as loading paper and replacing ribbons.
Software Features
The KSSM emulation software provides the following features:
• Graphics and print quality. You can enable graphics mode and specify a
density mode (dots per inch), for either 8-pin or 24-pin images.
• Print Attributes. Characters can be bold, italic, double high, double wide,
etc.
• Page Formatting. Commands which allow you to set line spacing, page
length, and vertical tabbing.
• Font Typefaces. Also referred to as print modes. The six typefaces are
LQ, Near LQ, Normal, Hi-Speed, Super Hi-Speed, and Ultra Hi-Speed.