Error messages, Bootrom error messages, Error messages –2 – Polycom SOUNDPOINT SIP 2.2.0 User Manual

Page 100: Bootrom error messages –2

Advertising
background image

Administrator’s Guide SoundPoint IP / SoundStation IP

5 - 2

Error Messages

There are several different error messages that can be displayed on the phone

when it is booting. Some of these errors are fatal, meaning that the phone will

not able to boot until this issue has been resolved, and some are recoverable,

meaning the phone will continue booting after the error, but the configuration

of the phone may not be what you were expecting.

BootROM Error Messages

Most of these errors are also logged on the phone’s boot log, however, if you

are having trouble connecting to the boot server, the phone will likely not be

able to upload the boot log for you to examine.

Failed to get boot parameters via DHCP

The phone does not have an IP address and therefore cannot boot. Check that

all cables are connected, the DHCP server is running and that the phone has

not been put into a VLAN which is different from the DHCP server. Check the

DHCP configuration.

Application <file name> is not compatible with this phone!

When the bootROM displays an error like “The application is not compatible”,

it means an application file was downloaded from the boot server, but it

cannot be installed on this phone. This issue can usually be resolved by finding

a software image that is compatible with the hardware or the bootROM being

used and installing this on the boot server. There are various different

hardware and software dependencies. Refer to the latest Release Notes for

details on the version you are using.

Could not contact boot server, using existing configuration

The phone could not contact the boot server, but the causes may be numerous.

It may be cabling issue, it may be related to DHCP configuration, or it could

be a problem with the boot server itself. The phone can recover from this error

so long as it previously downloaded a valid application bootROM image and

all of the necessary configuration files.

Error, application is not present!

There is no application stored in flash memory and the phone cannot boot. A

compatible SIP application must be downloaded into the phone using one of

the supported provisioning protocols. You need to resolve the issue of

connecting to the boot server. This error is typically a result one of the above

errors. This error is fatal.

Advertising