Multiple line keys per registration, Multiple line keys per registration –22 – Polycom SOUNDPOINT SIP 2.2.0 User Manual
Page 70
Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 22
• The phone keys without removable key caps cannot be remapped. These
include:
— Any keys on the dial pad
— Volume control
— Handsfree, Mute, Headset
— Hold
— Navigation Cluster
Configuration changes can performed centrally at the boot server:
For more information on the default feature key layouts, refer to
on page
Multiple Line Keys per Registration
More than one Line Key can be allocated to a single registration (phone
number or line). The number of Line Keys allocated per registration is
configurable.
Configuration changes can performed centrally at the boot server or locally:
Central
(boot server)
Configuration File:
sip.cfg
Set the key scrolling timeout, key functions, and sub-pointers for each
key (usually not necessary).
•
For more information, refer to
on page
.
Central
(boot server)
Configuration file:
phone1.cfg
Specify the number of line keys to assign per registration.
•
For more information, refer to
on page
.
Local
Web Server
(if enabled)
Specify the number of line keys to assign per registration.
Navigate to http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the <Ethernet address>-phone.cfg is
removed from the boot server.
Local Phone User
Interface
Specify the number of line keys to assign per registration using the
SIP Configuration menu. Either the Web Server or the boot server
configuration files or the local phone user interface should be used to
configure registrations, not a mixture of these options. When the SIP
Configuration menu is used, it is assumed that all registrations use
the same server.