Polycom SOUNDPOINT SIP 2.2.0 - Manual (Page 188)

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 76
RAM Disk <ramdisk/>
This attribute’s settings control the phone’s internal RAM disk feature.
Request <request/>
This attribute includes:
• Delay <delay/>
Polycom recommends that you do not change these values.
Attribute
Permitted
Values
Default Interpretation
ramdisk.enable 0, 1 1 If set to 1, RAM disk will be available. The RAM
disk is used to cache downloaded wave files, and
other resources for the user interface.
ramdisk.bytesPerBlock 0, 32, 33, ...,
1024 0 These three parameters use internal defaults
when value is set to 0.
Note: For the SoundPoint IP 650 platform,
ramdisk.bytesPerBlock is internally replaced by 2X
the value.
ramdisk.blocksPerTrack 0, 1, 2, ...,
65536 0
ramdisk.nBlocks 0, 1, 2, ...,
65536 4096
ramdisk.minsize 50 to 16384 50 Smallest size in Kbytes of RAM disk to create
before returning an error. RAM disk size is variable
depending on the amount of device memory.
ramdisk.minfree 512 to 16384 3072 Minimum amount of free space that must be left
after the RAM disk has been created. The RAM
disk’s size will be reduced as necessary in order to
leave this amount of free RAM.